Let our specialists with 20+ years experience and thousands of repaired motors under their belt, take care of your servo motor repair needs. We have the best high precision equipment and enormous inventory of spare parts allowing us to repair the MOST BROAD range of servo motors, dc motors, ac motors, pancake motors, stepper motors, Electronics Repair and many of the other unique styles out there. With all repairs, your motor will be tested on OEM appropriate equipment to assure it works right the first time. With the use of OEM drives for each manufacture, it reduces the chance of failure as we’re not emulating the signals required for operation. Ultimately leaving no component unchecked on your repairs. All our services come with a hassle free one year warranty on parts and labour.

Why Accu Electric Inc.

  1. Servo Repair centre for many major brands such as Yaskawa, Indramat, Allen Bradley, ABB, Fanuc, Siemens, Mitsubishi, Rexroth, Panasonic, Bosch, and many more…
  2. Outfitted with testing software and hardware from all major brands
  3. Extensive stock of over 600 feedback devices
  4. Resolvers, Encoders, Absolute Encoders, Tachos, Hall sensors
  5. All work done in house, including rewinds, magnetizing, machining, encoder repair or replacement
  6. Every motor is tested on its appropriate drive before being shipped out
  7. AC/DC Electric Motor Rebuild services available for motors up to 700HP
  8. Dynamic Balancing in house
  9. Rewinding in house with 4 experienced dedicated winders
  10. Complete machine shop with 2 dedicated machinists in house

Widing Analysis

Winding can fail over an extended period of time, and without proper testing equipment it is hard to determine the cause.

With over $75,000+ invested in our winding analysis equipment, we catch:

  • Early phase to ground leakage
  • Phase to phase leakage
  • Resistance imbalance between phases
  • Inductance imbalance between phases
  • Impedance imbalance between phases
  • Phase angle imbalance between phases
Servo Motor Repair Services - Winding AnalysisServo Motor Repair Services - Winding Analysis

Magnetizing in House - Servo Motor & Drive RepairMagnetizing is a key component with most stepper and pancake motors. Due to the type of magnets in stepper motors, when the rotor is removed from the stator the magnetic properties of the rotor are lost. Without the latest magnetizing equipment, most repair shops cannot repair these jobs.

  • Capable of magnetizing N55 grade neodymium rare earth magnets
  • Fixtures for almost all sizes of rotors ready in stock
  • Required for pancake motor, and stepper motor repairs
  • Fixes many low torque issues with machines

Typically your servo, stepper or pancake motor incurring damage due to an overloaded system, causing a high current fault. This high current spike will cause the magnets in your motor to become demagnetized. Once demagnetized your motor may run, but with diminished torque. Under full load your system will fail. Another scenario in which damage is incurred is by opening the stepper or pancake motor. There is a specific air gap between the magnets in the stator and the rotor itself, if this air gap is lost (IE. by the removal of the rotor) demagnetization will occur.

By magnetizing the rotor after assembly, a high flux density is obtained that can be largely destroyed if the rotor is removed.

Thus by re-magnetizing your servo motor, stepper motor or pancake motor you will be assured that your motor will have the same torque output as it did when shipped from the manufacturer.

In this case BOSCH was unable to repair their own motor due to extreme damage. However we were able to rebuild this motor in 24 hours to get the client up and running with manufacture matched specifications.

Machining In House - Servo Motor & Drive RepairFull time dedicated machinists in shop allows us to repair industrial automation equipment with the highest quality standard. Not taking shortcuts we insure all our products are well fitted to manufacture specifications.

  • In house dedicated machinist
  • Designs by mechanical engineers
  • New shaft installation and repair
  • Retrofitting in house

Since we are outfitted with a Machine shop, we do not need to send any work out, thus we keep our repair cost down, and are not dependent on someone else to complete repairs.

Balancing in House - Servo Motor & Drive RepairOften after repair of magnets, and other rotor related faults, balancing is lost. Resulting in a vibrating noisy motor.

Our in house balancing insures your motor will run smooth and quite the first time you plug it in.

One of the most effective measures for preventative maintenance is infrared technology. With it we can determine faults in areas such as:

  • Bearings and bearing housings
  • Overheating winding
  • Overcurrent
  • Hot spots in breakers, contactors, fuses, transformers & more.
  • Coreloss testing (as shown below)
Infrared Analysis - Servo Motor & Drive Repair Infrared Analysis - Servo Motor & Drive Repair Infrared Analysis - Servo Motor & Drive Repair

Feedback devices repair - Servo Motor & Drive RepairLooking for a place to get your feedback device tested, or repaired? We specialize and are certified in all industrial automation feedback. Resolvers, incremental encoders, absolute encoders, linear encoders, optical encoders, hall sensors, tacho generators, texans, and more.

With over $400, 000 inventory of feedback devices, if we can’t repair your encoder, we can replace it.

With over a million invested in testing of servo motors, we now house the most operational servo drives in North America.

All servo equipment is run tested on it’s manufacture designated servo drive to insure correct operation the first time. Outfitted with testing software and hardware of all major brands. Stocking over $400,000 in feedback devices such as Resolvers, Encoders, Tachs.

We own over 30 robots and CNC machines that we use for full load run tests of devices like motors, pulse encoders, amplifiers, drives, power supplies, CPU boards, I/O boards, teach-pendants, displays, extended access units, reducers/gearboxes, all types of cables cables…

We run pumps with the appropriate liquid as water, coolant, oil or some other liquids prior for it to leave the shop.

Feedback Device Repair Capabilities Include:

Being certified by various electric motor producers we provide repair services to all major brands and most minor feedback devices. We carry a large stock of all kinds of replacement parts from all major and most minor producers. Choosing Accu Electric Motors Inc. you are guaranteed to get the fastest top quality service.

We provide you with both mechanical parts (including back covers) and electronic parts of encoders. We repair all types of encoders including:

  • Incremental Encoders
  • Mechanical Absolute Encoders
  • Optical Absolute Encoders
  • Magnetic Absolute Encoders
  • Capacitive Absolute Encoders
  • Battery-Powered Multi-Turn Encoders
  • Geared Multi-Turn Encoders
  • Self-Powered Multi-Turn Encoders
Feedback Devices - Encoders

Encoders and back covers from different producers

Do you have problems with your old Tachometers that are out of production? Then you came to the right place! We can always find new model that will fit just perfectly to your old motor. We can also repair your old tachometers. Up to you to decide.

Feedback Devices - Tachometers

Tachometers

Are you troubled with your old resolver that is out of production? Then you have come to the right shop! We can sure provide a new model that will correctly fit to your old motor. At that we can repair your old resolver. It’s up to you to decide and save.

Feedback Devices - Resolvers

Resolvers